Video about Bond 2000 GPS Tracker
Bond 2000 GPS Tracker
The Bond 2000 GPS Tracker has to be a great little innovative device. The name Bond says it all.
Wireless charging is not only the future in charging our phones, but we have applied this technology to the Bond 2000 GPS Tracker. There are good reasons why we applied this tech. Retaining a complete 100% waterproof ability was important, we also wanted to make it small in size and very covert. There are no buttons to switch the device on/off and no charging ports, just place it on the charging mat and GPS Tracker will start charging. If the battery has gone completely flat, when placing it onto the mat it will then reboot the device and start charging.
The Bond 2000 GPS Tracker is packed with performance, storing 10 thousand positions on its internal memory. This enables the device to store any positions that could not be sent due to no GSM coverage, this gives you a great tracking line when viewing on the panel.
Being informed when something moves within 6-10 seconds from around the world is another great feature. This is activated via the “ARM” button on the panel or simply press the “ARM” function on your mobile phone application. When the Bond GPS Tracker does not move it turns off its GPS receiver and shows sleeping on the panel, this is the time when you may want to “ARM” the device, so if the device then moves it will send a piece of data to our servers and then sms the users in your contact list. The Bond 2000 does not require GPS to inform you its being moved.
To be able to switch a device off completely from your panel and inform a device to only wake every x hours, not only enhances battery life to many months but also makes it difficult to detect when completely off. This is a great feature for those wanting to protect assets. The Bond Tracker can also be switched to a normal live tracker sending its locations from 5 seconds if required. Simply click the “battery save off” and the panel will inform you when the device is due to wake and return to a normal live tracker, this is shown via a clock on the panel.
The picture below shows the Bond tracker with a neodymium magnet. This magnet is very strong and has a pulling force of 35 kg.
• The Bond tracker was designed to be completely 100% waterproof and very covert.
• To charge the bond tracker you simply place it on the charging mat.
• The bond tracker can be supplied with a magnet inserted into the rubber housing.
• It will still retain the 100% waterproofing.
• We find that many modern vehicles do not have any steel underneath to place the magnet, so we can also supply the bond Tracker with no magnet, this can then be applied to the vehicle via other means.
Battery 2000 Mah
50 Channel GPS receiver
Completely 100% waterproof
L 62mm/W 34mm /H 31mm
Tracker battery life :
Normal mode : 10 to 15 days
With “battery save mode” :
1 position per day : 14 months
2 positions per day : 7 months
3 positions per day : 5 months
4 positions per day : 4 months
Report every 1 HR : 20-25 days
Report Every 4 HR : 40-45 days
Report every 8 HR : 75-90 days
|Housing||Radio Technology||GPS/AGPS Functionality||Battery||Battery Life|
|L 62mm/W 34mm /H 31mm||Frequency: 850/900/1800/1900 MHz||Channels: 50 Channels, GPS L1 frequency||
||Under normal use 10-15 days|